OLVM: 2 Node with Gluster Storage with Arbitrated Replicated Volumes
Contents
Introduction
Virtualization made a significant change in the IT (Information Technology) industry. This technology helped many organizations to use server resources efficiently. Even though cloud technology is emerging some companies are not ready to move their workloads to the cloud due to data sensitivity and business obstacles. So the only option to save the IT infrastructure cost using virtualization technology.
For small and medium-scale companies IT budgets are really tight. Due to a limited budget, It’s a challenging job to achieve storage system stability with virtualization. When organizations plan on virtualization optimal architecture needs 3 nodes; 3-node architecture gives proper fencing and high availability. Oracle Corporation combined with open source virtualization and introduced (OLVM) Oracle Linux Virtualization Manager. For OLVM there is no restriction to having 2 node architectures. When considering the storage availability there are three ways to archive this using OLVM.
- Fiber Channel Storage – FC Data Domains
- GlusterFS Storage – Gluster Data Domains
- ISCSI Storage – ISCSI Data Domains
GlusterFS and ISCSI it’s a must to have a 10g back-end network for management. GlusterFS Storage replication is happening via the management network.
Two-node architecture storage stability can be archived by implementing the GlusterFS arbitrated replicated volumes. This mainly addresses avoiding storage split-brain conditions.
In this article, I would like to highlight the implementation steps of the Gluster Storage Arbitrator.
GlusterFS Arbitrator Implementation prerequisites.
Why Arbiter?
Split-brains in replica volumes
When a file is in split-brain, there is an inconsistency in either data or metadata (permissions, uid/gid, extended attributes, etc.) of the file amongst the bricks of a replica. We do not have enough information to authoritatively pick a copy as being pristine and healing to the bad copies, despite all bricks being up and online. For directories, there is also an entry-split brain where a file inside it has different gfids/file types (say one is a file and another is a directory of the same name) across the bricks of a replica.
What is a Gluster Arbitrator?
The arbiter volume is a special subset of replica volumes that is aimed at preventing split brains and providing the same consistency guarantees as a normal replica 3 volume without consuming 3x space.
If you need to read and understand the get the complete picture, try the below-mentioned link: https://docs.gluster.org/en/v3/Administrator%20Guide/arbiter-volumes-and-quorum/
Redhat: https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3.3/html/administration_guide/creating_arbitrated_replicated_volumes
Arbitrator Disk Capacity?
Arbitrators only store only the metadata of the files stored in the bricks. When the replicated main to disk is 1TB you need only 2MB of space from the arbitrator side to store metadata.
minimum arbiter brick size = 4 KB * ( size in KB of largest data brick in volume or replica set / average file size in KB)
minimum arbiter brick size = 4 KB * ( 1 TB / 2 GB )
= 4 KB * ( 1000000000 KB / 2000000 KB )
= 4 KB * 500 KB
= 2000 KB
= 2 MB
Pre-Requisites
- Host the arbitrator disk outside the OLVM environment
- Need at least 1GB network to replicate metadata to arbitrator disk
- To avoid any fencing issues for storage, the OLVM management network should to 10G
- Open required ports to communicate with GlusterFS
Implementation Steps
For this example, we are going to host the arbitrator disk in the OLVM engine server
Partition the Disk
Partition the disk using fdisk and create LVM, Our other GlusterFS bricks are hosted as LVMs. I would recommend keeping the brick and arbitrator disk identical.
[root@olvm-engine-01 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 50G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 49G 0 part
├─ol-root 252:0 0 44G 0 lvm /
└─ol-swap 252:1 0 5G 0 lvm [SWAP]
sdb 8:16 0 250G 0 disk
sdc 8:32 0 100G 0 disk
sdd 8:48 0 100G 0 disk
sr0 11:0 1 1024M 0 rom
[root@olvm-engine-01 ~]# fdisk /dev/sdc
Execute lsblk to get the disks layout
[root@olvm-engine-01 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 50G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 49G 0 part
├─ol-root 252:0 0 44G 0 lvm /
└─ol-swap 252:1 0 5G 0 lvm [SWAP]
sdb 8:16 0 250G 0 disk
sdc 8:32 0 100G 0 disk
└─sdc1 8:33 0 100G 0 part
sdd 8:48 0 100G 0 disk
sr0 11:0 1 1024M 0 rom
Setup LVM for arbitrator disk
[root@olvm-engine-01 ~]# pvcreate /dev/sdc1
Physical volume "/dev/sdc1" successfully created.
[root@olvm-engine-01 ~]# pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 ol lvm2 a-- <49 ---="" -l="" -n="" -wi-a-----="" -wi-ao----="" .00g="" 0="" 5.00g="" 90.00g="" 90g="" attr="" code="" convert="" cpy="" created.="" created="" data="" dev="" g="" gfs_dev_lv="" gfs_dev_vg="" group="" log="" logical="" lsize="" lv="" lvcreate="" lvm2="" lvs="" meta="" move="" ol="" olvm-engine-01="" origin="" pool="" root="" sdc1="" successfully="" swap="" vg="" vgcreate="" volume="" ync="">Create xfs file system on the arbitrator disk and mount this as a persistent mount point.
[root@olvm-engine-01 ~]# mkfs.xfs -f -i size=512 -L glusterfs /dev/mapper/GFS_DEV_VG-GFS_DEV_LV
meta-data=/dev/mapper/GFS_DEV_VG-GFS_DEV_LV isize=512 agcount=4, agsize=5898240 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1
data = bsize=4096 blocks=23592960, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=11520, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Discarding blocks...Done.
[root@olvm-engine-01 ~]#
Execute lsblk to validate the partition disk
[root@olvm-engine-01 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 50G 0 disk
├─sda1 8:1 0 1G 0 part /boot
└─sda2 8:2 0 49G 0 part
├─ol-root 252:0 0 44G 0 lvm /
└─ol-swap 252:1 0 5G 0 lvm [SWAP]
sdb 8:16 0 250G 0 disk
sdc 8:32 0 100G 0 disk
└─sdc1 8:33 0 100G 0 part
└─GFS_DEV_VG-GFS_DEV_LV 252:2 0 90G 0 lvm /nodirectwritedata/glusterfs/dev_arb_brick_03
sdd 8:48 0 100G 0 disk
└─sdd1 8:49 0 100G 0 part
sr0 11:0 1 1024M 0 rom
[root@olvm-engine-01 ~]#
Discover Arbitrator Node
Now discover the arbitrator disk from KVMs.
gluster peer probe olvm-engine-01.oracle.ca -- Execute on both KVMs
Expected output after peering
[root@KVM01 ~]# gluster peer probe olvm-engine-01.oracle.ca
peer probe: success
[root@KVM02 ~]# gluster peer probe olvm-engine-01.oracle.ca
peer probe: Host olvm-engine-01.oracle.ca port 24007 already in peer list
Add Abitrator Disk to GlusterFS
[root@KVM01 ~]# gluster volume add-brick gvol0 replica 3 arbiter 1 olvm-engine-01.oracle.ca:/nodirectwritedata/glusterfs/arb_brick3/gvol0
volume add-brick: success
Validate Arbitrator Replicated Volume
[root@KVM120 ~]# gluster volume info dev_gvol0
Volume Name: dev_gvol0
Type: Replicate
Volume ID: db1a8a7e-6709-4a1c-8839-ff0ab3cc4ebe
Status: Started
Snapshot Count: 0
Number of Bricks: 1 x (2 + 1) = 3
Transport-type: tcp
Bricks:
Brick1: KVM120:/nodirectwritedata/glusterfs/dev_brick_01/dev_gvol0
Brick2: KVM121:/nodirectwritedata/glusterfs/dev_brick_02/dev_gvol0
Brick3: sofe-olvm-01.sofe.ca:/nodirectwritedata/glusterfs/dev_arb_brick_03/dev_gvol0 (arbiter)
Options Reconfigured:
storage.fips-mode-rchecksum: on
transport.address-family: inet
nfs.disable: on
performance.client-io-threads: off
cluster.data-self-heal: on
cluster.metadata-self-heal: on
cluster.entry-self-heal: on
cluster.favorite-child-policy: mtime
Conclusion
OLVM two-node architecture with GlusterFS data domains has a high chance of having this split-brain issues. split-brain issues can be completely avoided by implementing arbitrated replicated volumes.
The important factor is you do not need a huge disk to implement this arbitrator disk. But remember OLVM management network should be 10g to support the brick replication. Whatever changes happen on the storage level to replicated via the management network.